ICOM for BMW is a high performance BMW interface that will take the place of BMW GT1,BMW OPPS and BMW OPS.
Integrated Communication Optical Module BMW ICOM is a high performance BMW vehicle interface that will take the place of the older BMW GT1 (Group Tester One), DIS-Plus diagnostic tools and will eventually replace BMW OPS and BMW OPPS diagnostic tools. It supports the new service processes; it also is integrated to work with older model series. Diagnostic ONLY.
(stand alone version).
Adapters:
ICOM A, OBD style diagnostic vehicle connector with communication protocols for MOST, K-CAN, D-CAN, KL15/30 detection, ignition failure status, battery status and TD signal for measurements.
ICOM B, OBD style diagnostic vehicle connector with a high speed MOST extension for ICOM A and uses USB connection to the ICOM A.
ICOM C, Old style 20 pin diagnostic vehicle connector (in engine compartment) to OBD. Service interval reset and engine speed signal.
All BMW series can be processed with the ICOM A, B and C-modules:
ICOM A, vehicles with OBD capability (connect to ISIS/SSS/ISID with LAN or WAN)
ICOM B, for programming with MOST port (connect to MOST in vehicle / to ICOM-A with USB system)
ICOM C, older model series with diagnosis socket in engine compartment (OBD 2)
