Injector settings 1. opening prssure settings:                        Set                      check new          3820±40 psi        3740 psi min.                 (263.5± 2.8 b r)    (25 7.5 bar) service      3620±40 psi        3410 psi min.                 (249.5±2.8 bar)    (2 35 bar) 2. valve lift: turn 3/4  1/8 .0135 (0.34m m) nominal 3. spray orifice size: .0116 (0.29mm) 4. spray orifice number: 4 5. sac type: t apered mini 6. check nozz le “chatter” per pencil nozzle serv ice manual 9900 2. if accept able procee d to step 7. 7. return oil leakage: 1 t o 14 drops / 30 seconds max. at 1500 psi (service only). Settings for new nozzle or when a new pressure adjusting spring is used.
	+Marine Nozzle
	+Cat Nozzle
	+Manual Fuel Pump
	+CR injector
	+Common Rail Valve
	+Repair Kits
	+Delphi Spare Parts

	Pencil Injectors	Stanadyne No.	John Deere No.	Ford No.	Caterpillar No.	J.I. Case No.

Stanadyne No.	Stanadyne No.	Stanadyne No.	Stanadyne No.	Stanadyne No.
38416	26632	20668	23143	20491
38515	26964	20669	23546	20492
32262	33405	20670	22762	20493
29279	33406	20671	22808	20495
28484	33408	20672	27254	20496
28485	33409	20673	27959	20497
28481	33704	20674	28303	20498
27336	33706	20675		20499
27333	33710	20676	27836	20502
26993	28682	20677	27127	22674
22042	33407	20678	28412	22675
20494	33708		24412
36597