| Inventory | 100000 |
Best quality hid kit:
Model:World-NB Flexible Kit
Test Video Links: http://v.youku.com/v_show/id_XMTQyNzMwOTk2OA==.html?from=y1.4-2
HID xenon conversion kit parameters:
HID conversion kit = 2pc ballasts + 2pc bulbs +1pc User Manual +1pc warranty card+6pc tie
Technical Data oF World-NB Ballast
Normal ballast parameter:
Input Voltage:9-16V
Normal Voltage:13.5V
Normal Current:3.2A
Max. Input Current:9A
Operating Temperature:-40 to +105C
Output Power:35W,50W,55W
Output AC
Frequency:250Hz
Start Time:45s
Start Voltage:20-25Kv
Performance: Waterproof:Accord with DIN 40050
Standard Dustproof:Accord with SAE J575
Standard Shockproof:Accord with DIN 40046 Standard
The advantage of World-NB ballast:Most Important!!!
Global originate cold and hot without impact start,can prolong the hid bulb life span 2times.
Cold start current:6.2A.
Original fuse in car is 7.5A.But most of ballast in market are higher than this owing to their factory cant control this.Its a hidden danger to original car circuit.
Hot start current3.6A.Very stable electric current keep you safe when you are switching between high light and low light in driving.But some suppliers are up to 10A and not stable enough.
Hot start power35W.Stable hot start power make no damage to xenon bulb.This prolongs xenon bulbs lifetime 1.5 to 2 times.However most of other suppliers are high to 75W.
Cold start power56W.No damage to burner and xenon arc.However many others are up to 105W.
Output voltage:60V/165V.After worked for 2000 to 3000 hours later,Xenon bulb working voltage reach to 115V to 150V.
At that time many ballasts can not provide that high voltage.So xenon bulb can be lighted up again.But our ballast can output more 10 to 15V.
This meands xenon bulb can work more 600 to 1000 hours.Working efficiency:87%.Very close to Hella,Germany(89%).
High efficiency means ballast use most of power for xenon bulbs work and release less heat.
Release less heat means ballast components can work in a good condition.
This is the key why we can control our ballast
Our ballast is developed according to the xenon bulb features,and we do the six strict testing for it.
Light distribution test,opthalmic test,aging test,matching test,precipitate test and strike a light test.
Encapsulating:
We use A B two group silicon gel,A and B inosculate.Waterproof and heat conducting.
Ballast Function:
A. Overvoltage Protection
B. Short Circuit Protection
C. Undervoltage Protection
D. Overcurrent Protection
E. Circuit Protection
F. Waterproof, Anti-dust, Shockproof
Bulb type:
Bulb type | |
Single bulb | H1,H3,H4,H7,H8,H9,H10,H11,H13,9004,9005,9006,9007,880,881,D1S/R/C,D2S/R/C |
High halogen and low xenon bulb | H4/L,9004/L,9007/L,H13/L |
High xenon and low halogen bulb | H4/H,9004/H,9007/H,H13/H |
Moving bulb | H4 H/L,H13 H/L, 9004 H/L,9007 H/L |
Bi-xenon bulb | H4/Bi-xenon,H13/Bi-xenon,9004/Bi-xenon,9007/Bi-xenon |
Motorcycle bulb | H6-M |
The parameter of Ballast:
| Model | 12V 35W | 12V 55W | ||
| Reted Input Voltage | 9-6V | 9-16V | ||
| Input Start-up Current | 5.5A | 5.5A | ||
| Stable Input Current | 3.1A | 3.9A | ||
| Input Low Voltage Protection | 7.0±0.5V | 7.0±0.5V | ||
| In put High Voltage Protection | 16.0±0.5V | 16.0±0.5V | ||
| Rated Output Power | 35W | 55W | ||
| Output Frequency | 250±10%HZ | |||
| Rated Output Voltage | 85V AC | |||
| Instant Start-up Voltage | ≥23KV AC | |||
| Output Short Circuit Protection | Automatically stop working within 2s which open circuity | |||
| Output Open Circuit Protection | start-up continuously,power supply works constant | |||
| Quack Start | 60% luminous flux within 1s,80% within 4s,100% within 1s | |||
| Rated Working Efficiency | ≥90% | |||
| Not-stop Startup | Normal Working | |||
| Standard Work Temperature | -40~150 degree | |||
| Water Proof,Anti-vibration,Salt Spray Test | Standard working | |||
| Lifetime | ≥3000hrs | |||
| Weight | ≈2kg/kit | |||
| Box Color | Small white box | |||
| Carton Size | 58×36×33cm/70*36*33 | |||
| Package | 30kits in one carton | |||
FAQ:
1.After installing HID,it happen to light flashing.
World answer:Due to the battery cell can’t offer enough electricity,it happen to light flashing.Adding special harness can resolving this problem.
2.After installing hid,it happen to astigmatism.
World answer:Due to the ballast offer the electricity imbalance,it happen to astigmatism.Adding resistor harness can resolve this problem.
3.After installing H1 hid,it happen to light flashing.
World answer:Due to the H1 base is very small,it need fix exactly,then it will no lamp flashing problem.
Material advantage:
1.Initial startup without concussion in the global.
2.with silicon gel sleeve on the enamel-insulated wire,To stop the high voltage puncture and avoid the break circuit instance.
3. AMP connector,anti-high temperature,Philips inner tube,put an end to spillage the xenon gas,Japanese Rubycon capacitance,Special material which mostly use for army industrial .it is more than 20 degree working range than the normal capacitor.
Good Service:
1) Super Quality:Stable performance and low repair rate(less than 0.1%during one year).The best HID and Xenon bulbs in China.
2) Warranty:18 months.
3) Professional for the products, customs, your local price and quality.
4) Perfect After-sale Service.
5) Delivery time:5-7days.
1.We use stand 125degrees high temperature capacitance.Other company use 105degrees capacitance can't stand high temperature.Capacitance is most important component and has many function,like filter,resonance,shunt circuit and so on.
The capacitance good or bad will decide the ballast life span directly.
2.Our SB 12V 35W AC ballast has 4 layer circuit board.Other company has only 2 layer for AC ballast.
3.We have 6pcs mosfet on 1 AC 35W ballast.Other company has only 4pcs or less mosfet on it.Mosfet function is control frequency.
4.We use Japan TDK transformer,capacitance and transformer produce resonance step-up.
6.Full filled silicon high voltage bag can do 23000V starting voltage.Other company high voltage bag fill little silicon into it.It can’t do 23000V starting voltage.
7.Initial startup without concussion in the global.
8.with silicon gel sleeve on the enamel-insulated wire,To stop the high voltage puncture and avoid the break circuit instance.
9.AMP connector,anti-high temperature,Philips inner tube,put an end to spillage the xenon gas,Japanese Rubycon capacitance,Special material which mostly use for army industrial .it is more than 20 degree working range than the normal capacitor.
AC And DC BallastAC ballast has no positive and negative pole difference.The electron number alternately cycle move,then the pole temperature is low and prolong hid life span.
But for the DC ballast,the electron number is always from positive to negative pole.Then the negative receive the electron number will be much heat,high temperature and perforation.The defective rate of DC ballast is higher than DC ballast.
AC ballast has better and more components than DC ballast.Our AC ballast has 6pcs mosfet and DC ballast has 2pcs mosfet.
SB And NB BallastOur SB ballast is slim ballast and NB ballast is normal size ballast.Slim ballast is used updated components to save the size,then it is easy to install and shipping coveniently.
Like desktop and laptop,more than more people choose laptop now.
Certifications
Production:
Test:
Advantage:
Application:
Trade Process
Warranty Service
